PEEL INSTRUMENTS PTY.LTD.
Australian Owned, Designed and Manufactured
4WD PRODUCTS
Battery Level Indicator – Available Soon
Indicates Battery Voltage via an accurate 7 bar Led display. Incorporates a switch to enable monitoring of both the Main and Auxiliary Battery, therefore avoiding being stuck with a flat cranking battery or over discharging the auxiliary Batt. Incorporates 2 red, 2 orange and 3 green led’s giving an indication of and over approx. 10.1, 10.6, 11.2, 11.6, 12.1, 12.4 & 12.6V. Suits all major vehicle makes/models, fitting into the existing dash allocations, as well as universal panels. Suitable for 4wd’s, Trucks, Buses, Caravans,
On/Off Isolator Switch
Neat flush mount On/Off switch suited for almost any 12V application, incorporating a Yellow LED indicating when the accessory is switched on. Suits all major vehicle makes/models, fitting into the existing dash allocations, as well as universal panels. Suitable for 4wd’s,Trucks, Buses, Caravans, Water Craft. (i.e. Driving lights, Thermo Fan’s, Lighting, Bilge Pumps etc.)
0-90 Ohm On/Off Switch Gauge
Ideal for running with aftermarket sub tanks/long range fuel tanks in 4wd’s, Trucks, Buses or Water Craft. This 0 – 90 Ohm, accurate 7 bar led indication fuel gauge incorporates, 1 red, 1 orange and 5 green led’s. The light dimmer dims the led’s for night driving. This On/Off Switch Gauge is fitted into a flush mount panel suitable for all major vehicle makes/models.
CP6D
Suited for the Headlight Upgrade kits using Halogen Low beam & HID High beam. This unit eliminates the 2-5 seconds of no headlights experienced when changing from low to high beam (ie. The HID globes take a few seconds to light up). The CP6D recognizes when the high beams are switched on and continues the give power to the low beams for approx 4-5 seconds.